Made to Measure Woven linen Roller Blinds

How to measure up for your Roller Blind:

Inside a window recess

 Width: Measure the width of the recess from the left to the right (see E on the diagram) 

Length: Measure from the top of the recess to the bottom (see E on the diagram)

YOU ONLY NEED TO PROVIDE US WITH THE FULL RECESS MEASUREMENT - the maker will allow for the rolling mechanism when making the blinds (There will be a gap of about 1.5cm between the fabric and the recess wall which will allow some light through, even with a blackout lining)

Outside a window recess

Width: Measure the outside of the window recess (see F on diagram) and add at least 5cms on each side to minimise any light leaking through. 

Length: Measure from the required position above the window (we recommend adding at least 5cm), to the length you require (see F on the diagram)

This also applies to blinds that will be fitted to the outside of a door recess, we only need the width and length that you would like the finished blind to be.

Please note that if your roller blind is outside the recess, we have to allow for the mechanism at either side of the roller blind, which is usually 1.5cm each side. For example, if you want the fabric width of your blind to measure 100cm, you need to specify this upon placing your order as 'finished fabric width', otherwise our makers will assume it is the recess width, and cut the fabric down to 97cm with the remaining 3cm for the mechanism, i.e. 100cm full fabric width + 3cm for mechanism, making the final recess width 103cm.

 Your Roller blinds will be delivered complete with hanging instructions and fittings.